What equipment is used to process stones into machine-made sand? There are various types and complete models on the market, mainly to make all kinds of large stones into standard construction sand. According to different processing effects, it is divided into crushing and sand making equipment. According to the crushing method and mechanical structure characteristics, it is recommended to have Jaw crusher, impact crusher, cone crusher, and sand making machine equipment can be reasonably selected according to the actual situation.
Crushing equipment-coarse/medium crushing
Jaw Crusher
It is generally used for head crushing and coarse crushing. It adopts the working principle of extrusion crushing. The crushing cavity is deep and has no dead zone, which can handle large stones. The integrated structure of the motor base and the main machine makes installation easier and saves space;
Impact Crusher
It is used for secondary crushing and secondary crushing. It is suitable for medium-hard and low-abrasive stones. It uses impact to crush materials. The rotor and crushing cavity are designed for different applications. The finished product is cubic, with good grain shape and high comprehensive benefits;
Cone crusher
Medium crushing, suitable for crushing stones of medium and above medium hardness, adopts the working principle of extrusion crushing, no filler is required for rolling the wall of the mortar, quick and convenient replacement, automatic control system, combination of various cavity types, and is also very suitable for large-scale processing plants ;
Sand making equipment - fine crushing
Impact sand making machine
It is suitable for high-standard material requirements. It adopts the working principle of stone-on-stone and stone-on-iron. The deep cavity impeller and the impact angle of the crushing cavity are improved, and the throughput is increased by 30%. The surrounding guard plate can be turned up and down. Replace the worn parts to reduce the cost of use;
Compound Sand Making Machine
It mainly uses the working principle of stone-on-stone, with small wear, three-dimensional design, small footprint, no sieve bar setting, and materials with large mud content are not easy to block, and the water content can reach about 8%. At the same time, the iron pollution is extremely small, and the impeller is automatic Small lining wear and easy maintenance;
Fine crushing sand making machine
It is a continuous operation equipment with grates, which can handle various hard and brittle materials. The hammer head has a long service life. At the same time, it can achieve high linear speed and fast operation during operation. It saves 50% of electricity and consumption compared with traditional equipment. Small area;
messages
If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours.
